high quality din 41612 type b connectors As an important component, widely used in a variety of industries. Its proper use is very important to ensure its own performance and service life. If used improperly, it will affect the normal use of the connector or lead to product failure. For this reason, Konnevotel will share with you the considerations for using high quality din 41612 type b connectors for your reference.

high quality din 41612 type b connectors As an important component, widely used in a variety of industries. Its proper use is very important to ensure its own performance and service life. If used improperly, it will affect the normal use of the connector or lead to product failure.

When terminating, the connectors should be terminated and inspected in strict accordance with the corresponding terminating standards, and terminated according to the corresponding contact number. The thickness of the maximum insulation layer between the selected cables should match the distance between the contact parts, and the cable core should match the terminals of the contact parts;

â‘¡ When welding, the corresponding power of ferrochrome should be selected according to the diameter of the bare wire. The welding time of each contact part is generally not more than 3 s, and it is necessary to pay attention not to let the flux penetrate into the insulation, so as not to reduce the insulation resistance of the commodity;

â‘¢ Clean connectors, including the cleaning of contact parts, can be scrubbed with fabric dipped in water-free ethanol and used after drying. Toluene and other chemical solvents harmful to electrical connectors shall not be used;

â‘£ When the aviation socket connector is in a non-plug-in state, the supporting dust cover must be covered or other dust prevention measures must be taken.

Check before plugging

The type, number, number, insertion position and direction of high quality din 41612 type b connectors shall meet the requirements of the design and process documents;

â‘¡ The cable shall not be bent, and the skin shall not be damaged;

(3) The shell and interface of the air socket connector should be free of deformation, cracks, thread damage, fastener loosening or defects, and coating falling off;

â‘£ locking device, seal ring should be intact;

⑤ Sockets, sockets and other interfaces should not have foreign bodies or liquids;

â‘¥ The pin and socket should not have skew, deformation and other defects;

⑦ The surface of the insulation material at the root of the pin should not be broken, metal broken, etc.;

⑧ The pin plug and plug should not have obvious shrinkage or protrusion. Compared with a normal pin plug on the same plane, its withdrawal or significant distance should generally not be greater than 0.5mm, otherwise, it is necessary to check whether the pin or socket is not installed in place or retracted.

Inserting and removing operation

â‘  Before inserting, check whether the number and interface of the plug and socket are consistent and accurately positioned;

â‘¡ In the process of pushing or tightening high quality din 41612 type b connectors, the plug should be aligned parallel to the butt face of the socket, and then pushed or tightened into place along the axis direction and locked. If there is a large obstacle or a feeling of sticking, stop the operation, and pull out to check whether the connection is faulty.

â‘¢ When tightening the connector, the cable protruding from the rear cover must be tightened and cannot be rotated;

(4) For the aviation socket connector with thick cable, the cable should be fixed in practical application to avoid the cable sag caused by the connector can not be pulled out or damaged;

After the electrical connector is inserted and locked, the rear cover outlet cable should be kept in a natural extension state. The starting position of cable bending should generally be more than 30mm away from the rear cover outlet;

â‘¥ When inserting and removing a connector, hold the connector body for insertion and removal. Do not hold the cable outside the rear cover for operation.

Through the above introduction, we should have a certain understanding of the precautions for the use of high quality din 41612 type b connectors.

Only by mastering the correct use of high quality din 41612 type b connectors can you avoid pitfalls and avoid mistakes in actual use. But the premise is that you must have a high-quality, powerful high quality din 41612 type b connectors.

high quality din 41612 type b connectors https://www.kujunconnector.com/TYPE-B-Connectors