The manufacturer of the toy hologram demetallization machine can be said to have been on the market for some years. As long as it is a machine, there are always some minor problems. Those who often use the toy hologram demetallization machine manufacturer may find that During the printing process using the toy hologram demetallization machine manufacturer, some unpleasant odors will be produced. The worse the ink used, the stronger the smell will be. It is estimated that there is a big question mark in the mind about whether the toy hologram demetallization machine manufacturer is harmful to the body.

Where might the unpleasant smell produced during the production of toy hologram demetallization machine manufacturer come from?

Many people who have come into contact with the manufacturer of toy hologram demetallization machine would say, During the printing process of the toy hologram demetallization machine manufacturer, the ink will always produce an unpleasant smell. It is impossible not to produce an unpleasant smell. So what are the sources of the unpleasant smell and how to solve this situation when it occurs?

Source 1: The led ultraviolet light curing lamp of the equipment will produce a slight ozone during irradiation. This smell is relatively weak and the amount is small, so it is generally not detectable. If the smell is strong, check whether the lamp is too powerful and damaged. Solve the problem in time.

Source Two: When led lights illuminate the material, on the one hand, the ink undergoes a chemical reaction with the material surface, releasing an odor; on the other hand, the heat generated can damage the material surface. A small amount of the material affected will release related chemical substances and produce a pungent smell. According to actual needs, the illumination power of the lamp can be reduced, or a coating can be wiped on the surface of the material.

Source 3: UV ink products themselves contain a certain odor and will produce some smell after curing, which is generally within a reasonable range. If the unpleasant smell is too strong, check whether the ink has expired or is of poor quality. Just replace it with new and qualified ink.

Source Four: Without communicating with the manufacturer, some users may add some additives or other auxiliary materials to the ink or the surface of the material. These untested liquids may also produce pungent odors. Do not randomly combine and adjust ink, coatings and other consumables to avoid damage to the equipment.

Source 5: Substrates of different materials, affected by the environment, will release related chemical substances and produce pungent odors.

It is worth noting that under normal circumstances, the odor produced by uv ink basically dissipates within half an hour after printing is completed, and there will be no odor after 24 hours. The odor itself volatilizes very quickly and will not remain on the surface of the substrate for a long time. The actual operator only needs to keep a distance of more than 2 meters from the printing platform of the toy hologram demetallization machine manufacturer to avoid the irritation of the ink odor. Technicians can place the printed materials in a well-ventilated area for four hours to eliminate the unpleasant smell.

hologram demetallization machine manufacturer https://www.zhhologram.com/De-Metallization-window-Machine